We provide excellent quality Automobile Toughened Glass In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance.

Following are the specification of our products:

• Safety, once broken, it splits into tiny harmless pieces.
• Hardness, 4 times harder than ordinary float glass.
• Special logo and pattern can be printed on tempered glass.
• Outstanding performance in resisting thermal stress and wind-load.
• Bear sudden temperature change of 220 centigrade degree.
  
  Applications
  • Traffic vehicles, such as the windows of train, bus, car etc
  • Architecture, such as windows or other areas in a building
  • Household appliances and furniture, such as glass table top and show shelves.

We specialize in manufacturing Architectural Toughened Glass. We offer Toughened glass (also known as tempered glass) is a type of safety glass that has increased strength and will usually shatter in small, square pieces when broken. It is used when strength, thermal resistance and safety are important considerations. Using toughened glass on windshields would be a problem when a small stone hits the windshield at speed, as it would shatter into the small squares making visibility difficult and it would also be likely that the wind would blow the small squares into the driver and passengers. In commercial structures it is used in unframed assemblies such as frameless doors, structurally loaded applications and door lites and vision lites adjacent to doors. Toughened glass is typically four to six times the strength of annealed glass.

Our range of Clear float glass is made of molten glass which flows through tweel to tin bath and then to lehr. While floating through the molten tin, the glass under the works of gravity and surface tension becomes smooth and flat at both sides.
Clear float glass is transparent and offers a high visible light transmittance. These products are sourced from good quality float glass producers. Clear float is sold as cut-to-size or bulk form. Clear float is also available in laminated and toughened form.
Our float glass products are very high quality with perfectly flat, excellent optical performance, stable chemical capability and high mechanism intensity. There is no distortion/roller wave or other imperfections and it's able to be tempered and further processed. The clear float glass is also resistant to acid, alkali and corrosion. The specifications and features of our float glass are as follows:

• Smooth and flat surface, and good vision. Flexible size specifications minimizing cutting loss. Substrata for each level of glass processing.
  
  Float Glass Is used for :
  
  
• Architecture
• Mirror.
• full shaded windows;
• Showcases and other displays
• Glass panels and screens
• Furniture and decoration.

We offer tinted glass which Usually given a bronze or grey cast, tinted glass dramatically cuts glare and heat from the sun (solar gain) yet only slightly reduces the amount of light admitted into your home. Where sun-caused fading or damage may be a serious problem, such as at unprotected south-facing windows, you may want to opt for glass with a solar bronze or solar grey tint to reject UV rays.

Following are some of the specification available in our product:

• It can be bent, tempered or heat strengthened and in addition it can be silk-screened or enameled.
• Reducing transmission of harmful rays by 80% and minimizing fading to interior furnishing, but has no effect on the U-FACTOR.
• Harmonizing with modern building materials to provide an exciting and elegant look to new buildings.

Applications:

Architecture application.
Automotive application.
Height 850mm
Furniture application.

Reflective glass is a product resulted from multi-metal coatings on the float glass as raw material. Through the application of vacuum coating, the finished product characterizes various visual effects and different optical and calorific features.
Reflective glass absorbs and reflects a major proportion of the sun's direct energy more effectively than tinted glass.
A coating is applied during glass manufacture.It is ready to be cut, heat strengthened and toughened. This product is sometimes called a hard coat reflective. The features and specifications of this climber are:

• Reflects light and heat with a metal oxide coating giving a mirror finish.
• Minimized solar heat gain and ultraviolet light transmittance.
• Reflective glass adds daytime privacy with it's reflective, mirror-like surfaceReflective glass can be tempered for added strength in certain industrial applications.

Applications

• Table top
• door windows
• Furniture and decoration
• double glazed window
• superior performance to standard glass products

It is manufactured by permanently bonding two or more lites of glass with layers of polyvinyl butyral (PVB) interlayer, under heat and pressure, to create a single construction.

Following are the specification that we provide in our product:

• Safety. Even if the glass is broken, the tough interlayer film prevents fragments from shattering.
• Discoloration resistance. It intercepts 99% or more of incoming ultraviolet rays, protecting furniture and furnishings near windows from discoloration caused by exposure to direct sunlight.
• Good sound insulation.
• In addition to clear PVB, we can also provide various colors to meet different requirements.

Applications:

• Sloped or Overhead glazing
• Museums, Prisons, Government Buildings
• Jewelry Stores, Banks, Airports
• Schools, Hospitals, Hotels
• Interior Partitions, Office Buildings
• Safety Glazing Applications

Patterned or figure rolled glass is made by running molten glass over a patterned roller which reproduces the pattern on the glass. In addition to diffusing light and obstructing visibility from the outside, the figures soften the interior lighting.Figured roll glass is used to diffuse, not obscure, an object when viewing. The glass is also used as a popular decorative product. The specifications and features of this product are:

• Figured glass is a decorative and translucent glass with figures on one face. The patterns are able to soften the light in a space and ,at a suitable angle,to curtain the visibility through it.
• Figured Glass is used for window and door interior partition reception room furniture & show sheives ect

Our range of Mirrors are of very fine quality. Made through a chemical sedimentation process. A specially treated silver sheet is coated on quality waveless float glass, followed by a sheet of copper, and then finished with two layers of paint for protection. The features specifications of these mirrors are as follows:

• Made of waveless float glass (our float glass from Saint-Gobain)
• Double coated paint
• Exact image, high reflectivity, reflection ratio is about 93 percent
• The mirror can be made into safety mirror through sticking special PE film in the backside
• Deep processing, can be cut into any size and any shape and sand blast process is available.
• Polished edge processing, round edge, flat edge and beveled edge, etc.
• Packing, seaworthy wooden cases with paper interleave
• In order to meet the environment requirements of EU, USA and other countries , we can also produce copper free silver mirror.

APPLICATION:

• Traffic vehicles, such as the windows of train, bus, car etc
• Architecture, such as windows or other areas in a building
• Household appliances and furniture, such as glass table top and show shelves.

We import and supply a wide range of glass products . The products are of international quality and can be availed at competent rates. Customers can avail our products within mutually decided time frame. The glass products and aluminum composite panels offered by us are soundly packed before the final dispatch of products.

The solid, high-density Glass Hardwaress are our speciality. S. Kanakaraju Chetty & Son supplies the world's best quality branded glass hardware fittings for windows and door hardware, export good quality hardware for worldwide customers. Our existing products lines, include the hardware for Window / door security, casement window, screen glass etc. The range can be customized on the requirements of the customers.

"S. Kanakaraju Chetty & Son" is a leading provider of all types of decorative glass - beautiful and visually exciting alternatives to standard interior glasses. We are committed to providing commercial & residential builders, homeowners and decorators with interior glass that are not only elegant, but also high in quality and affordable.

"S. Kanakaraju Chetty & Son" provides unique decorative glass designs, some of which are made using the ceramic frit technique of glass decoration with unlimited decorating possibilities. These beautiful yet affordable decorativre glasses are available in a variety of styles and types like- stained glass, etched glass, acis etched glass, carves glass, fusion glass etc. :

Following are the specification of our product:

• Distinctive, uniformly smooth and satin-like appearance
• Same light transmittance as the equivalent thickness of ordinary float glass while providing softening and vision control.
• Maintenance is easy, marks, like finger prints can be easily removed from the surface of the glass.
• Widely used in residential and commercial settings.

We supply durable and superb quality UPVC Windows. Our windows are famous for their exclusive look and affordable prices. We offer unique designs and colors of this product range. We are one of the leading organizations supplying such products in several verities. Our UPVC Windows product varieties are as follows:

Turn Windows

Single or multi shutter turn windows are made out of UPVC multi-cavity frames sections of 50 x 50 x 2.5mm suitable reinforced and welded in corners and double multi-shutters division are made by using shash mullion having 50 x 64 x 2.5mm multi-cavity UPVC section, suitably reinforced with G I and shutters are made out of 50 x 64 x 2.5mm UPVC section, reinforced and welded in corners with EPDM Gaskets provision for Glass and for air tight at frames and outer side of shutter with single glaze or double glaze window shutters and using suitable glass bead with perfect hardware like hinges, handles, stays, ect. Some partitions of windows are available with fixed glass as well as louward, as per the design. Top hung window shutter are also provided according to customers requirements.

Louward Windows

We supply Louward windows which are made out of frames section 50 x 50 x2.5mm multi-cavity section suitably reinforced by G I and welded in corners and louward glass can be fixed on Aluminium louward blades. These windows are suitable for W C / Bath etc.

Sliding Windows

Three track sliding windows are made out of multi-cavity section having 97 x 43 x 2mm multi-cavity section suitably reinforced and having upward projection for sliding of shutter and Nylon rollers and having slope for draining rain water outside and welded in corners with shutter made out of 57 x 31 x 2mm multi-cavity section having provision for nylon rollers fixing and glass fixing with EPDM Gasket with glass bead and welded in Corners with suitable locking system and handles, etc complete. These three track-sliding windows are very suitable for use and long lasting at best economical price and can replace Aluminium. The outer shutter also can be used by mosquito nets to prevent entry of mosquitoes.